1 / 4
Use a Milwaukee M18 battery on a Milwaukee M12 tool. (WIP) — zdjęcie 1
1 / 4

Use a Milwaukee M18 battery on a Milwaukee M12 tool. (WIP)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a work in progress.This is an idea to run a Milwaukee M12 tool off a M18 battery. You will need a DC-DC step…

Ocena
0 / 5
Polubienia
20
Pobrania
146
Wydruki
0
Wyświetlenia
1060
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This is a work in progress.

This is an idea to run a Milwaukee M12 tool off a M18 battery.

You will need a DC-DC step down converter (buck converter) because while tools designed for 12 volts will run on 18V, they will wear out faster. Here is a good idea of where to get a suitable one:

https://www.aliexpress.com/item/32999701159.html (get one at least 5Amp)

Put the converter within the hollow top piece.

Use spade connectors to connect to the tool and battery, male at the bottom female at the top.

hold the bottom and mid sections together with four 8-36 (3/4" long) machine screws, or glue.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

**Rafts:**

No

Supports:

Yes

**Resolution:**

300um

Infill:

20%

**Filament:** generic PLA

Category: Machine Tools

Tagi