G3 Zed Stomp Pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is for replacing the standard G3 Stomp Pad Kit, used on Zed bindings when running brakeless.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution
G3 Zed Stomp Pad - Standard Size
This file is to allow you to use your G3 Zed bindings without the use of a brake. G3 calls this kit the “Stomp Pad”. While not expensive, it can be hard to hard to find in stock, and is pretty easy to print.
NOTE: As of now, this print only includes the standard size, roughly 14.3mm in height, which should work with most ski bindings. In order to check fitment, I have also included a 1.5mm spacer/shim, which should be used to check the gap size between your boot heel, and the Stomp Pad. See this video for further details:
Print Settings
Material: PETG, ABS, ASA, or alternative tough materials
Print Orientation: The edge side of the pad should be placed onto the build plate
Other Parameters: Print with 3 walls, 0.1mm layer height, Support is needed, minimum 25% infill.
Revisions
| Revision | Description | Date |
| 01 | Initial Release | Nov 17, 2024 |