2.2/3.0 Rimset for Pro-line Icon Tire on 3Dset Buggy Model 7
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2.2/3.0 Rimset for Pro-line Icon Tire on 3Dset Buggy Model 7. 8mm Hex Fitment.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 418
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I wanted ridiculously oversized tires for my 3DSets Model 7 Buggy, and couldn't find rims I liked. So i came up with these.
They are 2-piece rims (for easy adjustment for other tires should the need arise). The were designed for the Pro-line Icon 2.0/3.0 tire.
The have a 7mm deep 8mm hex in the back for mounting to the axle.
Printed with no supports, 15% infill, PLA. I used Prusaslicer paintbrush to color the hub and bolts. The model is single color.
FreeCad design file attached. STL and STEP attached.
Uses 5 3x10mm screws to hold them together.