Tower of Stairs - Manifold Garden
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A decorative model of Hallway 000-001 from the game Manifold Garden
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Share Alike
This model has two versions: one with the walls and bridges separately printed (generally recommended) and one with all the parts combined. Most parts need a few supports but the removal should be trivial. For assembly, I would recommend using superglue for a quick build or a low-temp soldering iron for a more thorough and continuous look, though it takes significantly more effort.
Recommended Print Settings:
Layer height - 0.2mm
Line width - 0.45mm (0.4mm nozzle)
Material - PLA (or other low-warp materials)
Print temperature - 205°C
Print speed - ≤80mm/s (perimeters)
Supports - Auto generated classic, snug (Prusa/derivative slicers)
The last two pictures are my own screenshots from the game :)
The original model is not owned by me, it's from the game Manifold Garden. Go check it out, it's a really cool game.
