Ring Contact Sensor Back Lid and Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Back lid for Ring contact sensor (2nd Gen) like the original one or with offset to rise it.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 405
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2024-01-02:
- updated some little measures after first print: now it works!
- 2 more offset added as stl files.
- I will soon publish the magnet lid. I have already designed it, but need some minor correction after first print.
Back lid for Ring contact sensor (2nd Gen) like the original one or with offset to rise it.
Useful if you have broken the original one, if you need to line it up with doors or windows, to make it with the color you prefer or just to not have the adhesive layer on the back of the sensor.
I hope to design the other lid of the magnetic sensor too.
Tell me if you print it and how it works.
Warning: I designed it with FreeCAD (v0.21.2), but still never printed. I will do it soon.
In time to come I could share the FreeCAD project. The design is parametric so you can set the offset that you want:
