yet another dust shoe for CNC Router
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I Designed this Dust Shoe for my CNC Router It clamps to the spindle with a +/- 60mm fit.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed yet another dust shoe for my CNC Router
It clamps to the spindle with a +/- 60mm fit.
You will need:
- 18x 8x2.6mm Magnets
- 1x M6x20mm Bolt
- 1x M6 Nut
The Flaps are supposed to fit between the Bottom and the pressure ring. And are beeing held by the press fit. Works great for me!
The main parts are made from PLA and the flaps are printed in TPU.
There is also a 35mm diameter to fit any hose or vacuum tube on the other end.
(Ps.: My spindle had a small diameter difference so i made a step in the clamping diameter.)