1 / 1
Motorbike Bobbins M6 and M8 — zdjęcie 1

Motorbike Bobbins M6 and M8

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Motorbike Bobbins for Universal Stands

Ocena
0 / 5
Polubienia
4
Pobrania
20
Wydruki
0
Wyświetlenia
103
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

This is a standard bobbin for a M6 or M8 bolt. I have it on all my racing bikes. Its super quick to print and much cheaper and lighter than aluminimum ones. It features a big protection disc for the swingarm not to get scratched when you want to pull up the bike quickly after a session. 

The best part of it is how it breaks in case of a crash. I had to replace swingarms because the bolt broke a considerable peace out of it with aluminium bobbins. The plastic ones are crashtested (yes, sadly not only once) and it only bent the bolt (even M8). The swingarm remained intact and even the fillet was fine. i just had to remove the remaining plastic and the the bent bolt and screw in a new one. 

I printed it with PETG, with enough perimeters to have 100% infill on the middle part when the bike is resting on. PETG is good in this case because of its chemical resistance, it doesnt melt or anything with some oil or gas.

Tagi