Waterpump wheel Aprilia RS125
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Waterpump wheel Aprilia RS125 with a ground plate for better performance
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I made a waterpump for my Aprilia RS125 Racebike. It has a groundplate for better flow and more stability. I printed it out of very well dried nylon. (Easynylon from Overture)
printed slowly with a ,6 nozzle.
I tested it on my racebike and it performs well. Hard to say if its better or not than original because temperature varies with so many factors. But its definetly not worse than oiginal.
Of course: USE AT YOUR OWN RISK! IF YOUR ENGINE GETS DAMAGED ITS NOT MY FAULT.
In my case it didnt break and held up a few sessions on the track.