Orange Pi 5 Plus Case v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OP5+ Case designed for my Belabox IRL Backpack, updated from my previous model to better support cables.
- Ocena
- 4,5 / 5
- Polubienia
- 14
- Pobrania
- 174
- Wydruki
- 2
- Wyświetlenia
- 994
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
There are a few files, Please choose the correct one for your use case. In Prusaslicer, Right Click → Split to separate into lid/body.
Updated Version of my other Orange Pi Case, Extruded out the sides to wrap around and better support cables plugged into the device. Also cut out some space to better access the SD Card and Ethernet cables. External walls are also thicker and it's been optimized for minimal bridging.
Printed in PETG with .6mm nozzle
The board is press fit, and case is sealed with 5 or 6 Flat M3 screws, optional 5v 3007 fan that is press fit as well. You may need to cleanup the model slightly depending on your printer.