1 / 4
4 inch / 100mm Ventilation Ducting Connectors and Outlets — zdjęcie 1
1 / 4

4 inch / 100mm Ventilation Ducting Connectors and Outlets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

4 inch / 100mm Ventilation Ducting Connectors for tight turns outlets.

Ocena
0 / 5
Polubienia
33
Pobrania
220
Wydruki
0
Wyświetlenia
1643
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

Connectors and outlet plates for 4 inch / 100mm ventilation ducting.

Print two '45 degree angle' parts and glue and/or bolt together to create a complete connector. Printing in 2 parts has the advantage that no supports are need for printing.  This connector also has holes on the outside so it's easy to hang the ducting from walls or the ceiling.

The connectors attach to 4 inch ventilation ducting. They are designed with a small ridge so the ducting doesn't slip off. Secure the ducting with cable ties.  You can ‘chain’ cable ties together to get a long enough tie to fit all the way around the 4 inch ducting.

Print settings:

  • No supports required.
  • I used PETG for strength and longevity. 
  • Print with at least 5 walls for strength.

 

Tagi