18650 Battery Box with TP4056 Charger and On/Off Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy box with 18650 battery, TP4056 charger and on/off switch.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a sturdy box with mounts for a single 18650 battery, TP4056 charging module and a micro on/off switch. The parts are designed for nearly support free printing and with layer lines oriented to provide optimal strength and durability. Orienting the parts this way requires that a couple of them be glued in place during final assembly. The battery holder prints best for me with support enforcers enabled and supports placed only on the main overhang inside each of the battery end caps. Depending on your printer you may be fine with no supports at all. The box end cap is held in place with two M2 screws.