Nozzle extension for a heavy duty caulk gun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension tube for a heavy duty caulk gun 29 oz, 825 ml
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 482
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Nozzle extension for a heavy duty caulk gun
Tip Diameter: ¼ inch (6.35mm)
Total Extension Length: 31cm (when printed diagonally on an i3-style bed)
This extension works great for reaching tight spots, but note that the trigger will become stiff due to the added length.
Assembly Instructions
Use at least one small self-tapping screw to secure the extension to the caulk gun. Without the screw, the extension may pop off during use, friction fit is not sufficient to hold it in place.
Printing Recommendations
Material: Print with PLA.
The attachment hole will slightly deform during print, to fix this issue heat it up and insert the glue cartridge.
Printing Orientation: Diagonal print orientation ensures maximum extension length.
Cleaning and Maintenance
Add mineral spirits to the wide end of the extension to soften residual glue. Use a spoke or similar tool to push out the softened glue.
Follow cleaning instructions specific to the adhesive used.
Mineral spirits dissolve adhesive but won’t damage the PLA part.