Diamond Earrings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual color diamond earrings. I used Polymaker PolyWood for the lower section and regular white PLA for the top…
- Ocena
- 4,917 / 5
- Polubienia
- 206
- Pobrania
- 921
- Wydruki
- 17
- Wyświetlenia
- 2037
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution
Dual color diamond earrings. I used Polymaker PolyWood for the lower section and regular white PLA for the top surface.
A variant with a sidewards facing fastening hole is also included, note that it has the same thickness as the rest of the earring, so it won't look as nice in dual color prints.
You might need to post process by removing stringing with a small knife and cleaning up the holes with a small drill bit.
Attribution: Idea and basic shape from https://www.thingiverse.com/thing:2637332
EDIT: Added v2 which is the same, but the fastening eyelet is slightly larger and 0.2 mm thinner.
Please post a Make if you make this!
Notes:
ColorChange print, insert an M600 (filament change) at around 2 mm depending on your layer height.
Originally published in 2017: https://www.thingiverse.com/thing:2722420
Category: Earrings