Anycubic Kobra 2 Pro Filament Crane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A top mounted Spool Crane for my Kobra 2 Pro, because I needed a frictionless solution for my TPU prints
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 176
- Wydruki
- 0
- Wyświetlenia
- 928
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this model because the original spool holder from Anycubic made the printer too wide and other spool holders were holding the spool 90° off of the unspooling direction, which is not very good if you are printing TPU (stretchy stretch, print bad).
You can use CNC Kitchen's insets and a threaded rod to screw it all together, but I added a pin, which you should be able to glue into the axes (untested).
I added a bunch of 6 mm holes on the front for expansions. I added a Bowden clip, because I couldn't come up with a better idea, but you could mount a camera on it, for example.
For my print, I used PETG, but a sturdy PLA print should work as well, depending on if you have an enclosure and how hot it gets in there. PLA will soften pretty quickly and bad things could happen.
Walls ……….… 2
Infill …………... 30%
Supports …… Yes, on the chamfered edge, inside and below the axis hole
I also added the step files, but if you need adjustments, let me know, and please post your makes 😅
UPDATE: I added a filament guide you can attach to the crane. Fasten with the Dübels, glue at your own discretion