Moulinex Salad Spinner Internal arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complete internal arm with intergrated gear to replace a broken one.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We have an old Moulinex salad spinner from the 1980 (or something like that).
The internal arm used to move the salad shaker was partially broken.
As I found nothing on the web, I decided to create a new one using the broken one as a model
Thanks to online tutorials on Fusion360 and some work, here is the result.
I did some test using PLA and decided to print the final version using ASA filament on my MK4S.
Best to print it with the gear at the bottom. Support on build plate required.
I recommend to multiply by two the layers and perimeters parameters. Infill 30%, 15% to be ok as well