1 / 6
Fixation of glass lid for Qidi Plus 4 with QIDI-Logo — zdjęcie 1
1 / 6

Fixation of glass lid for Qidi Plus 4 with QIDI-Logo

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

fixation of glass lid on QIDI Plus 4

Ocena
5 / 5
Polubienia
14
Pobrania
107
Wydruki
4
Wyświetlenia
737
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This holder is used to lift and fix the glass lid when printing on PLA or PETG.


I designed the component in two parts, the holder plus the colour accent with a separate component. I would print the actual holder out of PETG for higher temperature resistance and the coloured component out of PLA of your choice, then fix both with a little glue.

Please do not hesitate to send me your suggestions for enhancements or improvements to the Qidi Plus 4. I will certainly take the time to work on your suggestion...