PeliPi 1150 - Pelicase 1150 + rpi4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
after various searches for ideas i found this result via google:https://bit.ly/392aYQRI then built a similar device…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
after various searches for ideas i found this result via google: https://bit.ly/392aYQR
I then built a similar device because I needed a linux device for diagnosing the components in our vehicles. I wrote my own GUI for it, so that I can only operate it with touch input.
The tray for the keyboard was taken over unchanged from rad73. I got my keyboard from pearl but this keyboard is also available under other brands and cheaper - elsewhere in the www.
boots from a flash drive (internally connected to USB 3.0)
Front-Panel holds:
- SD Card slot
- 1x USB 3.0,
- 1x USB 2.x
- HDMI
- RJ45
- USB-C (Power in)
- 12mm Tact-Switch with built in led (GPIO 5 feature of rpi)
parts (except printed parts & flash drive) are listed in the BOM.txt (Bill of Materials)
The button switches on and off & ensures that the Pi get shut down properly. The power supply is realized via USB-C cigarette lighter adapter, which supplies 3 Ampere.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.20
Infill:
25%
Category: Computer
