Low-Profile Stand for Elektron Digitakt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An elegant stand to raise the device to a more ergonomic angle. Attaches via the existing VESA mount.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 163
- Wydruki
- 0
- Wyświetlenia
- 876
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With these lightweight legs screwed on, the Elektron Digitakt is raised to a more comfortable 25° angle. Mounted in reverse they instead raise the angle to 45°, with the cost of some stability. The stand should probably also work with the very similar Digitone and Syntakt. Inspired by other models of the same general idea, I just wanted to create one to better fit my partner's setup.
- Mount using M4x8mm screws, using too long screws may actively harm your device! -
Adding anti-slip or furniture pads of whichever sort you prefer is optional but recommended.
Printing
No support is needed, print as positioned with the sides flat against the bed