1 / 2
Gas Mask NATO 40mm Spacer and Blockoff
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple parts to block airflow and space for symmetry.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 343
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane
All of my intakes are free-flowing, and when put on a port that was originally blocked, it's not the same. So these are some basic parts to compensate for that. The blockoff disc has a slight raised portion for centering, and the washer disc is just to space out the other side to match, if needed.
Easy print, no supports needed. 8 of these took an hour to print at 0.2mm layer height.
I'm including a set in every order I sell.
General disclaimer: Use at your own risk, for aesthetic purposes only.
NSFW by association.