Primitive self-adhesive adapter for MikroTik hAP ax² (ax2) / ac² (ac2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Primitive adapter to make translucent mounting plate in MikroTik hAP ax²/ac² compatible with self-adhesive strips
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1038
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
Some MikroTik Wi-Fi access points, most notably hAP ax² (ax2) and hAP ac² (ac2), use a distinct translucent base ("hAP case base"), which is used both as a stand and as a mounting plate for fixing to a wall or ceiling with screws.
However, it does not feature a flat bottom, so you can't simply use adhesive strips (like 3M Command or Tesa PowerStrips) to fix AP without screws.
This primitive, quick and dirty adapter solves the problem by using two M3x8 screws with nuts and up to three large 3M Command strips (18x74mm).
Printed with Hyper PLA-CF on Creality K1C using 0.16mm layers and 10% cross-hatch in-fill.