School Bus with Rolling Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Angrysquirrel's School Bus model with MMU color profiles and rolling wheels.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 983
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Painted Angrysquirrel's School Bus in traditional colors in PrusaSlicer and modeled and added additional chassis bits to allow the wheels to roll.
Print his axles, some trimming may be required to fit the wheels and roll smoother. Glue chassis bits to the bus and the wheels to the axles. Watch wheels roll.
Known Issues:
The text in school bus painted correctly, but didn't print when sliced. My little helper took a sharpie to it to “fix it” as I wasn't going to print another one. You may be able to edit this before printing.
I also got some weird artifacts towards the top half of the print, I'm just going to slightly sand it down versus a reprint (see photos). Bus body and wheels were printed in Inland PLA+ with MMU3 in the Original Prusa Enclosure (doors open). Bus chassis bits and axles were printed in Inland PETG (since that's what I had loaded at the time). Chassis bits 20% infill on its side with brim.
Prusa slicer keeps yelling at me since its in meters instead of millimeters. It is fine to convert, I'm not a good enough modeler to know how to default to mm :-(
Slicer also had some minor parts repaired, I'm not sure what they are. Printed fine, so full send. Enjoy, and upload your makes to show how much better at this you are than I am! Happy Printing!