Round Lamp with 5m LED strip and ZigBee
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a round LED Lamp, including holders for a Powerbrick and a gledopto zigbee controller.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 1150
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a round LED Lamp, including holders for a Powerbrick and a gledopto zigbee controller. You can use a whole 5 meter LED strip.
There are two parts for testing the connection between the base and the center part. Print them first, to make sure it works.
The M3 threads to secure powerbrick and controller aer modeled but you may need to cut them after printing.
Use some good glue to fix the strip in the spirale.
Be careful with electronics!
gledopto controller:
https://de.aliexpress.com/item/32858603964.html?spm=a2g0s.9042311.0.0.27424c4dyxrS0a
Powerbrick:
https://de.aliexpress.com/item/32672191071.html?spm=a2g0s.9042311.0.0.27424c4dyxrS0a
I'm using the 8A version.
If someone knows, why my pictures have the wrong orientation, please help me :-)
Print instructions
The biggest part (base) has a diameter of 230mm.
The highest part (diffusor) has a height of 306.5mm.
The center part is modeled empty inside to safe material and printing time. It has already a spiral on the outside for the positioning of the LED strip. 5 meter works perfect :-)
The diffusor is a simple cylinder which is printed in vase mode.
Layer height does not really matter.
Supports are not needed.