1 / 3
antivibration feet, vibration damper for mk4 with or without enclosure — zdjęcie 1
1 / 3

antivibration feet, vibration damper for mk4 with or without enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

this model is design to make your printer quieter and make quality better. With 6 centers of gravity.

Ocena
5 / 5
Polubienia
4
Pobrania
28
Wydruki
1
Wyświetlenia
369
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

models are printed from TPE, but TPU can be used too. For this to work u print 2x antivibrationsupport and 4x antivibrationsupport 2. The first ones are on the frame behind motors and  antivibrationsupport 2 are used always pair. One pair is used on front frame of printer and second pair on rear frame. Do as on photos. 

purple one is antivibrationsupport and green one is antivibrationsupport 2.

PRINT WITHOUT ANY SUPPORTS, 15% CUBIC INFILL

Tagi