christmas ornaments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
three designs for christmas ornament spheres
- Ocena
- 4,948 / 5
- Polubienia
- 3967
- Pobrania
- 15 238
- Wydruki
- 109
- Wyświetlenia
- 75 760
- Oceny
- 96
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Standard Digital File License
christmas ornaments
three designs for christmas ornament spheres
dimensions in mm: ~76mm diameter
there will be some small overhangs in the top of the sphere, which don't really impact and are not visible as they are on the inside, however if you'd like you can always enable tree supports only for that center section
in order to assemble, firmly but gently “massage” the connector into the first half until it's locked in position, then you can just push the other half into place, don't use excessive force otherwise there is a risk of cracking at the patterns
photos show printed in silk and metal pla and the connector in black matte pla (as i printed multiple at once)
- .40mm nozzle
- .16 layer height
- seam at back
- 10% gyroid infill
- detect thin walls
notes
- includes bambu studio 3mf file and STLs
- all photos uploaded are of the actual printed model, and are copyright protected
- if you enjoy this model please consider to buy me a coffee
- commercial licence membership available on my patreon