1 / 3
Dungeon Keeper 2 Coaster Dual Color - No MMU — zdjęcie 1
1 / 3

Dungeon Keeper 2 Coaster Dual Color - No MMU

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dungeon Keeper 2 Coaster - For Single Extruder Dual-Color Printing

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
117
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Dungeon Keeper 2 Coaster - For Single Extruder Dual-Color Printing
 

Top Side: Features the iconic DK2 Horned Reaper design.

Bottom Side: Displays the classic Bullfrog logo.

 

Important Information

If you see the warning:
“A filament specified in the G-code is either not loaded or is the wrong type”

Simply press OK to proceed.

 

Filament Changes:

Four filament changes are required:

Two changes for the bottom layer.

Two changes for the top layer.

 

Coaster Dimensions

Diameter: 100mm

Height: 1.4mm

 

Filament used

Eryone Silk PLA White

Eryone Silk PLA Red

 

Print settings

Nozzle size 0.4

Layer height 0.2 Structural

Wipe tower = false

Printers > General > Extruders = 2, Single Extruder Multi Material = true

Printers > Custom G-code > Tool change G-code: M600

Printers > Extruder 1 > Extruder Color > Color = White

Printers > Extruder 2 > Extruder Color > Color = Red

 

Build plate

Smooth PEI Steel Sheet

 

Optimization 

This optimization resolves the "wrong filament type" warning. You can either make the changes manually or use the pre-optimized G-code file:

File Name:
DK2 Coaster v5 SE-No-MMU_0.4n_0.2mm_PLA,PLA_MK3.5_41m.gcode

 

Manual changes

Export G-code as Text (not Binary):

Navigate to:
Printers > General > Supports binary G-code

Set it to false.

Edit the G-code File:

Open the exported G-code file in Notepad++ (or a similar text editor).

Locate Line 93,870 (or search for ; filament_type).

Change:

; filament_type = PLA,PLA

To:

; filament_type = PLA

 

Uncomment Lines 5,601 and 5,602 (or search for M600 and T0).

Add a semicolon (;) at the beginning of each line:

;M600 
;T0

 

Support my work

Like this model? Donate at https://paypal.me/hjembaek

Tagi