Kobalt TS10601 table saw Zero Clearance Insert Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zero clearance insert plate with cutout for riving knife
- Ocena
- 4 / 5
- Polubienia
- 15
- Pobrania
- 199
- Wydruki
- 0
- Wyświetlenia
- 680
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a blank plate for a kobalt table saw. There is a pre made cutout for the riving knife.
Need to insert 4 - 5mm threaded inserts into the 4 holes along with 4 grub screws to level the plate.
I used PETG on a 400 x 400 bedslinger. need atleast 350mm for the long direction.
If you need to split it in two in order to fit on your build plate, that is left up to you as most slicers have that ability now
The 3mf file was made on prusa slicer and includes a modifier that sets the infill to 100% along the portion of the plate that will be cut by the saw blade as you raise it. Feel free to use it or to use the concept so that you can use a lower infill percentage across most of the plate and 100% infill along the area that will be cut by the saw blade.