BMW 2002 E9 E3 Hazard Switch Nut Wrench - 61311356193
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This small wrench fit the OE BMW hazard switch found on 2002, 2002tii, 3.0CS, 3.0S, Bavaria, and 3.0Si models.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Any time I needed to remove the hazard switch on my 2002, I would the end up damaging the plastic nut since I was using whatever pliers that I could make fit. I got tired of scratching it up so I decided to whip this up to save myself some headache in the future.
Admittedly, I don't really see this as something I will use very often but it is certainly nice to have when doing repair work on the center console or the hazard switch itself.
Print in the stiffest material you have since the open design (needed for clearance on the 2002) allows it to flex when torque is applied. The nut and switch are plastic, so you shouldn't be tightening it too much anyway…