Gridfinity Kailh Choc Caps Organizer (2x3x2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
@mike_562356's Kailh Choc Caps Organizer in Gridfinity Format!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I used the Gridfinity Bin generator from https://gridfinity.bouwens.co/ and created a gridfinity holder for the Kailh Choc V1 keycaps. I wanted to have something that would easily organize my keycaps so they're not scattered all over the place. Each one holds 24 keycaps. They are a very tight fit with standard 18mm caps, but do manage to squeeze in there all together. Please make sure you go to @mike_562356's page and check out his version, download the single keycap holder to check tolerances, as you will likely need to adjust your slicer's x/y hole compensation. On my Bambu P1S this needed to be set to 0.1 for the key caps to fit snugly.