Phone divider insert for Mobile Bin for Cupholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for the mobile bin so that your phone won't flop around while driving.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the original design, except for the fact that my phone would slide all over the bin while driving around. So I designed this insert that slots into the left side of the mobile bin to secure the phone. Once it prints, just put it on the left side of the mobile bin, and slide it into the place. There's a notch on the right wall that cord clip will slot into.
Use whatever printer settings you want, but I'd advise against fuzzy skin on this. You can if you want, it just makes it a bit harder to get positioned and slide into place, but it will still work if you want that.
I printed at .3mm, 10% grid infill, 3 layer wall, printed laying flat on it's “back”, no supports with mouse ears.