1 / 7
Cover to install a Noctua fan NF 6*25 on a Meanwell RSP-320-24 — zdjęcie 1
1 / 7

Cover to install a Noctua fan NF 6*25 on a Meanwell RSP-320-24

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The RPS-320-24 is delivering a lot of power, but the original fan was just too noisy.

Ocena
0 / 5
Polubienia
9
Pobrania
81
Wydruki
1
Wyświetlenia
1260
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The RPS-320-24 is delivering a lot of power, but the original fan was just too noisy.
So I choose a Low noise fan NF 6*25.
But due to his width of 25mm, it must be installed outside of the original frame, so I designed a new cover to install it.
This new cover is fitting the RSP-320-24, with the "Supply Cover" from https://www.thingiverse.com/thing:2863826.
Not tested for LRS-320-24 or other "Supply Covers", but some of them may be compatible.

Print instructions

Just print :
Meanwell cover
Fan protection
Fan grid .
I used PETG, but not sure this was needed.

Be carefull to place some supports to print the cover, as the 2 areas fitting inside the "Supply Cover", need them.

I used 3*M3x18mm screws to fix the fan protection to the cover.