2013-2017 Mazda 6 (Gen3, GJ)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Interior light diffuser for 2013 Mazda 6.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I installed LED bulbs for the interior lights and realized that it was too bright for my liking so I made these diffusers to make them dimmer. Tested on a 2013 Mazda 6 so I'm assuming it'll work on all gen 3 Mazdas but not sure.
If you want it brighter/dimmer I would recommend changing the infill percentage. I recommend 30% infill for the front ones as it gives plenty of light while making it have less glare. The rear ones are a solid piece requiring no infill but if you want them to let less through I would recommend scaling up the y access in your slicer. Print settings:
Layer height: 0.2mm
Infill density: 30%
Infill pattern: Grid
Photo of model printed on BambuLab A1 using Creality white PLA.