Toothbrush Holder - Smiling Tooth
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wider version of Smiling Toothbrush Holder - that can fit also kids electric toothbrushes - with fixed internal mesh.
- Ocena
- 4,92 / 5
- Polubienia
- 679
- Pobrania
- 4373
- Wydruki
- 30
- Wyświetlenia
- 13 265
- Oceny
- 25
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A small improvement/remix of @PsychProd gorgeous model of Smiling Toothbrush Holder.
It fixes some strange artefacts and empty internal pocket in the model. It also widen model to fit kids electric toothbrush “Bob a Bobek” and toothpaste.
Printed model size is 85mm x 85mm x 127mm.
Toothbrush pockets: 61mm x 25mm x 80mm & 61mm x 34mm x 78 mm
Print recommendation
This model can be printed without supports if your printer has sufficient cooling and you can live with some unperfect overhangs.
I have also painted supports on the bottom of the model if you are not brave enough to run it without them =)
I strongly recommends adding brim (7mm or more) to the feets so they will hold better to the printers bed.
I would also suggest to slow down printing speed (acceleration, travers speed, etc.) on Bed Slinger printers for at least until tooth feets merge together.
Print Settings
Printer: Bambulab A1 Mini
Brim: Yes
Supports: No
Resolution: 0.2 (with adaptive layer height on top)
Infill: Gyroid 10%
Filament: eSUN PLA+ in White colour