Star Wars Venator-class Star Destroyer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed Venator Star Destroyer: split into 3 parts with joints, separate turrets/thrusters, optimized for less support.
- Ocena
- 5 / 5
- Polubienia
- 203
- Pobrania
- 1200
- Wydruki
- 6
- Wyświetlenia
- 5268
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATED 2025/1 - Thruster aligner spikes and joint pieces modified for a better fit
Remixed Venator-class Star Destroyer optimized for easier printing: split into 3 main parts with minimal support needed. Joints are designed to be glued together after printing, though joint pieces may need slight scaling down depending on your printer.
Turrets have been scaled up for added detail, and the finished model measures approximately 28.5 cm in length. I recommend printing the turrets separately, at a higher resolution. Added cones to the thrusters for easier alignment.
It is indicated in the filenames how many of each piece are needed. Perfect for smaller print beds and a cleaner print process!