Land Rover Defender Bonnet hinge insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thats a replacement part for the hinges of the bonnet , blueprint taken from original new part
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Print in TPU or some PP, i printed these in generic black TPU .
Funny enough as its not a complicated form i tried printing the TPU i have with 0.2mm layer and 0.4mm nozzle on my Ender 3V3 XZ with a printing profile for PETG, and i can say it worked better than the original TPU profile i had installed . Used 6 perimeters and 80% rectilinear infill.The part is already mounted and functional.
Needs a lick of grease on the OD , the TPU is creating a bit of friction with the steel bed of the hinge due to the weight of the bonnet itself.
I know its something that costs 1-2€ , but when you have all the necessary things to DIY-it i personally prefer it that way.