Rope Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handle for ropes to get a more comfortable grip than pulling on the raw rope.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
A handle for ropes to get a more comfortable grip than pulling on the raw rope.
I used that for an improvised weight lifting pulley system.
The thin version is shown on the photo, but a thicker model is also provided for more confort.
Designed with a 6mm groove for the rope, into which the rope gets pushed, but can be scaled up/down according to what you need.
I'd recommend mostly scaling along the width and height to adjust for rope size, and along the length to adjust for hand size.
🧵 Any filament (e.g. PLA/PETG/TPU/…)
✔ Can be printed without supports. Orient with the groove towards the bottom