1 / 2
Stylus caddie for the SeeSii NanoVNA-F V2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple caddie for the stylus. Uses the case screws and sits on the top or bottom of the unit.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Keep the stylus at hand. Simple caddie that sits on the top or bottom of the unit and uses the existing case screws. It should be printed on it's side, and you might need a brim enabled. The stylus will slip into the hole and lock in place with a twist. Print in 95A TPU and gain a bumper as well.