58.5mm Portafilter Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wide-mouthed portafilter funnel for hand-filling a 58.5mm basket
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 511
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple dosing funnel for a precision (VST, IMS, etc.) 58mm portafilter basket. It has a wider mouth designed for filling the basket using a dosing cup either from something like a Niche Zero or a hand grinder. The lip that fits in to the basket is a little shorter/thinner than other designs I've seen to hopefully not disturb the grounds too much after dosing and doing WDT.
The basket lip outer diameter measures a little under 58.5mm after printing on my printer, though the CAD specifies that it should be exactly 58.5mm. It should be a nice snug fit in the basket regardless, but not so snug that it's difficult to work with.
The outer angle of the funnel itself measures 55° so it shouldn't need supports to print beyond the basket seat. The model as uploaded is the best orientation I found to print; it just needs support on the basket seat of course. The print would definitely benefit from soluble supports and a tight interface, but it works, nonetheless.
I would definitely recommend a maximum of .1mm layer height to prevent any odd places where grounds may stick or collect. Print in your food-safe plastic of choice and enjoy.