Troodon 2.0 Pro 350 - Side-mounted spool holder/PTFE guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side-mounted spool holder and PTFE tube guide that utilizes existing side/back panel screws. No extra hardware needed.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Tired of the stock back-mounted spool holder? Here is my ad-hoc solution. Both the spool holder and PTFE guide are mounted using the existing side/back panel screws. No additional hardware needed.
The spool holder has a recess that allows re-use of one of the short PTFE tubes from the stock spool holder.
Note: I currently do not use the stock filament run-out detector. I have the stock PTFE tube going from this PTFE guide, through the stock exhaust location (skipping the stock metal PTFE tube stand-off), direct to the toolhead. With the toolhead moved to the front left/right, there is sufficient tube to keep from interfering with TAP. However, if I wanted to add the run-out detector, I'd likely want to get a longer PTFE tube.
You'll need to orient the parts in your slicer. PTFE guide can be printed flat. Spool holder can be printed with the PTFE slot facing up.