O`Brien v.113 "Gravekeeper" - Foxhole

Introduction

As a long term player and fan of the Video-Game “Foxhole” made by “Siegecamp” I was stoked to see the new addition to the game since the last Update. The Warden O`Brien v113 "Gravekeeper" or its new nickname the “Bonewagon” that it has in my Clan [82DK]. Its an extremely fun vehicle to play and one of my favourite models from the Game.

https://foxhole.fandom.com/wiki/O`Brien_V.113_Gravekeeper

Since I´m a big fan of 3D-Printed models, I dedicated a lot of my free time to make the model easy 3D-Printable based on the Game. I tried my best to get as close to the Original as possible.

3D - Modell

The Model is split in 9 Parts, I will give a short list on what you will need to print, for one Model and which Filament I used.

PLA (from “Das Filament”)

1x Frontwheel
1x Frontwheel Mirrored
2x Backwheel
1x Gun Barrel
1x Chassis
1x Turret

Glow in the Dark PLA ( from “Das Filament”)

1x Light Front 1
1x Light Front 2 
1x Tail Light

3D - Slicing

If you want to print this without using the given G-Code, I suggest to take caution with your support. Especially on the wheels and between the front axle and the frame since the support is gonna be a pain to remove. I suggest using the neat Prusa-Slicer feature to paint on Support where you need it and use the Auto-generated Support only from the Print Surface.

Depending on the size you wish to print at, Layer height is Important. At the 1:35 setting that my G-Code comes in, I recommend 0.15mm or 0.2mm. These are good heights as its a fairly quick print and you still have many of the details visibly.

If you want to slice the Models yourself and get “normal” Miniature sizes use the following 

1:35 you have to shrink it down to 21.3% 
1:100 shrink to 7.42%

3D - GCode

In the supplied G-Code you get 3 packages. I split the parts where I recommend to use PLA Filament into two packages. The “Wheels” pack and the “Chassis, Turret and Gun Barrel” pack.
The third package is very small and consist of the 3 “Lights”, here I recommend using Glow in The Dark Filament for the extra flair in the night.

Assembly

The parts are a snug fit on my printer. The turret should rotate freely. The Wheels are glued in place to secure them.

Since i love to get my Miniatures painted but, I can´t paint worth a dime. My buddy Klaus jumps in for me. His Discord handle is Klaus von Reinherz#0815 

If you are interested in the Model, but don´t have a Printer or can´t paint. Send him a DM and maybe we can set something up.

Final Notes

I am grateful for Siegecamp that they created Foxhole and all the lovely assets with it. I am planning on uploading more Prints from the Game if my free Time allows it.

If any Problems arise with the Model Contact me here or in Discord ZAYn0nDER#9999

The last picture is my First Prototype and not the Final Print. Just the only I had on hand to take a Picture.