Dual 5015 Fan Duct Quadro SV06/Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual 5015 Fan Duct for SV06/Plus
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 523
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
**THIS IS STILL IN BETA, MORE TESTING NEEDED, DO THIS AT YOUR OWN RISK**
**For the non plus SV06, you need to have the SV06+ Hotend or the Duct won't work**
For SV06+ it should work fine without modification
At least use PETG, ABS or better Recommended
Enable support, but use support blocker for the Duct as shown in picture 4-6, the fan adapter won't need support blocker unless it generate support in areas other than whats shown in picture 7 and 8
Wire up the 2x 5015 fan in parallel
Hardware needed:
For SV06 Plus:
4x M3x25 Countersunk
2x M3x20 Countersunk
2x M3 Any length from 5-20mm should work (For connecting the Fan Adapter to the Duct)
2x 5015 Blower type Fan
1x JST 1.25mm 2-Pin (if not already on the fan)
For SV06:
6x M3x20 Countersunk
2x M3 Any length from 5-20mm should work (For connecting the Fan Adapter to the Duct)
2x 5015 Blower type Fan
1x JST 1.25mm 2-Pin (if not already on the fan)