1 / 2
Printed, Sealed Gift Card "Enclosure"
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pause the print before the top layers, insert the card, then unpause to finish and close up the box
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
See below for a video of how I used this for my son's birthday.
- The picture shows text I added, the STL model does NOT have text.
- The internal cavity is 90x125x1.5mm
- The top and bottom is 4mm thick, the walls are 3mm thick.
- You should be able to resize the model in your slicer if you need a slightly different size cavity (note it will also scale the wall thickness, which is fine to a point)
- Normal Recommendation: Use PLA or PETG, because they have excellent layer adhesion
- Evil Recommendation: Use TPU, which also has great layer adhesion, but is like rubber. It will probably be very difficult to open without piercing the rubber.
- IF YOU PRINT WITH 0.3mm LAYER HEIGHT: Insert a pause after layer 428 (about 129mm). Then insert the card and resume the print.