Gridfinity Stackable Crate - 6x2mm Magnet R-R-R-Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nothing original - just added negative volumes for standard 6x2mm Gridfinity magnets and exported the STL just for you.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
All credit to @duawt the OG designer, seriously, I barely did anything.
The negative cylinders that I added are 6.5x6.5x3mm for a little tolerance, so you're probably gonna need some glue.
*I will try and remember to add a photo of the actual print… it's going right now.
*^^^EDIT: I'M DUMB AND BROKE IT: see photos, pretty sure it will work if you aren't impatient like I am and don't rip off the supports while pulling it off of a glued/Magigoo plate that's still warm (>.>)… Goofs n gags reel at the end… Trying again overnight with some other stuff. Seems fine though, I'm still using it. YMMV.
Printed in Bambu Labs Neon City PLA.
The OG design did not say whether or not supports were necessary, but as you can see I played it safe.