Endoscope to microscope adapter for the Aldi Maginon mk-800sh
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hooking up an endoscope to your Aldi Maginon MK-800SH microscope is a budget-friendly way to snap some awesome pictures.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution
Description
This model is free and took a lot of work to create.
If you appreciate this model, please leave a download and a like!
If you print this model, please post a make.
With this 3D-printed adapter, you can easily attach an endoscope with a 3.7mm camera diameter to the eyepiece. The model even has a handy arrow to show you which way is up, so your camera lines up perfectly with the microscope’s optics. For an even snugger fit, a bit of tape around the body tube works wonders.
Make sure to print the adapter at a 0.15mm layer height for the best results. And if your endoscope isn’t exactly 3.7mm, no worries—you can tweak the size in PrusaSlicer since it uses modifiers. Simple, cheap, and effective!