1 / 5
Sunlu FC01 Filament Connector Organizer Respooling station — zdjęcie 1
1 / 5

Sunlu FC01 Filament Connector Organizer Respooling station

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

this is a Remix

Ocena
5 / 5
Polubienia
65
Pobrania
253
Wydruki
2
Wyświetlenia
2763
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

this is a Remix
https://www.thingiverse.com/thing:6787267
and
https://makerworld.com/en/models/683303

the base of the FC01 was modified with 3D builder to graft the Organizer on it. all this was redone in Blender.
The base has been adjusted to allow the attachment of the spool holders.

requires support in contact with the plate following the adjustment of the base

requires
6x Round Threaded Brass Heat-Insert Nut M4x6mm
4x Round Threaded Brass Heat-Insert Nut M3x5.7mm
4x Knurled screw M3x10mm
6x conical head screws M4x30mm

Tagi