Diabolo / Air rifle Ammo holder for Benchrest shooting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to attach a airrifle ammo box (4.5 mm) to a mount that is suitable for cameras for benchrest shooting.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 741
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This model does not include the clamp, on the plus side you can get whatever clamp will fit your becnhrest.
When benchrest shooting with an air rifle you often want to attach the ammunition box to the actual benchrest, so you don't have to move your body out of position as much. These holders can be slightly expensive (or in my case out of stock).
I have a large number of clamps for cameras at home, so I decided to create a holder for the ammo box that could be attached to a ¼ inch screw, which fit said clamps.
This model supports screws up to 12mm long.
For some additional strength in the prints, I deviated from the standard print profiles.
Print Settings:
Material: PLA
Print height: 0.20mm
Infill percentage: 25%
Infill pattern: Gyroid
Top layers: 5
Bottom layers: 5
Wall count: 5