1 / 4
XRP Mecanum Frame — zdjęcie 1
1 / 4

XRP Mecanum Frame

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Expand the functionality of the XRP Robot by adding Mecanum drive

Ocena
0 / 5
Polubienia
17
Pobrania
71
Wydruki
0
Wyświetlenia
600
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Engineering
Licencja
Creative Commons — Attribution

Looking to expand the functionality of the XRP robotics kit?  Looking to learn how to program a robot to use mecanum wheels?

Check out the guide for this build on our Maker.io site located here: Enhancing XRP Functionality with a Mecanum Wheel Design

This is a larger print, that is roughly 240mm x 250mm so you may need a larger printer to print this file.  

It was printed on a Lulzbot Taz 6 printer with standard settings.  It should print without support needed as there is built in breakaway support under the support bar for the control board and around the marker holder slot. Make sure to print with side with the words on the buildplate for this to work correctly.

Tagi