Planetary Gear Box 775 DC Motor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4,7:1 Ratio, Easy to assemble and use. !Always put on cover ,pinch point hazard!
- Ocena
- 5 / 5
- Polubienia
- 100
- Pobrania
- 694
- Wydruki
- 2
- Wyświetlenia
- 4241
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This planetary gearbox is designed specifically for a 775 DC motor, offering a compact and efficient solution for high-torque applications. Add lubricant for better and quieter performance. !Always put on cover ,pinch point hazard!
ASSEMBLY GUIDE
1: Prepare all parts shown in the picture.
2: Put the medium gears(black) on three pegs as seen on the picture, put the small gear (white) in the middle.
3: Grab main body and put the spacer in the middle hole and a screw in one of the 4 holes( you can put how many screws you want 1 is the minimum).
Thread Size: M4 (metric thread, 4mm diameter, lenght 10mm)
4: Put the whole body on the motor and screw on the screw/s.
5: Put on the planet carrier at once, after that check if the small gear is touching the spacer, if not push it down on the motor shaft.
6: Make sure the planet carrier is flush with the top of the body.
7:Add the small shaft with the shorter end first. You can also use super glue to permanently keep it in place.
8: Screw on the cover as shown.
Thread Size: M3 (metric thread, 3mm diameter, lenght 25mm)