Stand for Metcal soldering iron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand to accommodate either a Metcal PS2 plastic or metal handpiece.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
##Stand to accommodate either a Metcal PS2 plastic or metal handpiece.
Ideally printed in thermosetting material like UV resin. FDM prints will not withstand the heat.
####•Spaces for OEM brass wool and sponge.
#####-Drain hole between brass wool and sponge, so any over-spray doesn’t sit and corrode the brass
####•Holds 7 spare SSTC/SMTC tips
#
### Updates:
V2: Made cradle removable and interchangeable. Dovetails hold the cradle in place allowing for the base to be repurposed as required.
V1.4: Increased height and deepened sponge cutout to accommodate the unusually thick OEM Metcal sponge
### Plans for improvement:
•Add magnet for ‘standby-mode’
•Add step to accommodate micro-handpieces
•Make handpiece slot interchangeable as a separate part