1 / 9
Krikzz MD Flashkit Programmer Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a case for the Krikzz MD Flashkit Programmer.
Cartridge Connector slot is supported so as to not bend the PCB when inserting the Flashkit. Have only tested it with PAL cartridges.
Print with the top half upside down to reduce the amount of required supports. See the Simplify3D image above where the supports should go.
It's a snug fit, but there is space for 4 M3x10mm screws to really secure it.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
.33
Infill:
15%
Filament:
Form Futura PLA White Post-Printing
4 x M3x10mm screws
Category: Games