St. Louis Cardinals Drink Coaster Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of four St. Louis Cardinals drink coasters with holder. Multi Material and Single Extruder.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
For fans of the St. Louis Cardinals. Design based on my original coaster set.
Four piece St. Louis Cardinals themed drink coaster set with holder. It can be printed with both a multi material printer or with a single extruder printer.
General:
- Layer Height: 0.20mm
- Infil: 15%
- I prefer to use something other than grid like cubic or gyroid
- Perimeters: Defaults are fine but you can bump the holder up to 3
- Supports: Build plate only for the coster itself, holder does not require them
Multi Material:
For the Multi Material version use the 3MF and select the color / extruder for each body part. I've labeled what color they should be, but hey you can use whatever you like. GCode files are set to go for MK4S MMU3 with White in Slot 1 and Red in Slot 2.
Single Extruder:
For the single extruder you want to print the Single Extruder Coaster version. You can do a layer height filament change at 8.20 (Layer 47). Then print the logo in the desired red color and press fit or glued together. The tolerances are really tight, I suggest a rubber mallet or something similar to lightly tap it into the recess.
For the base you'll do a layer height filament change at 8.20 (layer 47) and again 42.60 (layer 213).
Go Cardinals.